Styling sugegst styling changes
- Thread starter sharan23
- Start date
Currently reading:
Styling sugegst styling changes
change the front and repeater indicators to clears, alloys always make a huge difference to the look, meaty exhaust tip to fill the bumper cut out, i'd suggest a small drop, but i don't know the general conditions of the road in karnataka, colour code the mirrors
should make a good start
should make a good start
Have it all the same colour for a start...perhaps a respray?? Depends on how much you want to spend really
F R O $ T Y
F R O $ T Y
Last edited:
stealthstylz
New member
- Joined
- Aug 3, 2007
- Messages
- 118
- Points
- 36
I'd drop it over some wide, deep dished 13" wheels and keep the rest as it is. The matt black bonnet looks ace.
Matt
Matt
gosh i had nearly forgotten about this post. well thanks for your suggestions. i cannot afford to drop the ride height anymore cause of the awful road conditions here.
i have been desparately looking for 14" deep dish alloys, but the problem here is finding 98 PCD alloys, none of the dealers stock them. i would like ot get a nicer exhaust tip, thought i would do that when i get a K&N cold air intake in the induction side and a remus free flow kit.
i wanted to get Koni springs to make the ride a little more stiffer, but i think they cost quite a packet in india after all the damn taxes.
what i need the most inside is a air conditioning unit. But since the uno hasnt been on sale for about 7 years now, none of the FIAT dealers stock the AC units.
i am using a set of 4 JBL, 2 6X9 Coaxials at the back and 2 circulars for the front. this is been driven by a Sony xplod 3300 unit (very unhappy with this, waiting to upgrade to an alpine unit). what is on the cards, is a 12" sub, a monoblock and an amp for the speakers.
cheers
Sharan
i have been desparately looking for 14" deep dish alloys, but the problem here is finding 98 PCD alloys, none of the dealers stock them. i would like ot get a nicer exhaust tip, thought i would do that when i get a K&N cold air intake in the induction side and a remus free flow kit.
i wanted to get Koni springs to make the ride a little more stiffer, but i think they cost quite a packet in india after all the damn taxes.
what i need the most inside is a air conditioning unit. But since the uno hasnt been on sale for about 7 years now, none of the FIAT dealers stock the AC units.
i am using a set of 4 JBL, 2 6X9 Coaxials at the back and 2 circulars for the front. this is been driven by a Sony xplod 3300 unit (very unhappy with this, waiting to upgrade to an alpine unit). what is on the cards, is a 12" sub, a monoblock and an amp for the speakers.
cheers
Sharan
try:
www.team-bhp.com
indian based forum that has many members all over the country, quite a few fiat owners, and local get togethers, someone might have some help for you
www.team-bhp.com
indian based forum that has many members all over the country, quite a few fiat owners, and local get togethers, someone might have some help for you
Last edited:
punto5dr
New member
Pmip my ride did a panda last night (i know it was a repeat) worth a try lol
[email protected]
New member
put the new round logo of Fiat (small one which comes with Palio ) at the back just above the boot lock
also try to replace the Uno and fiat badges with nickel coated one, this will give uno a fresh look from the back , then side and front repeater with a clear one ,
also try to replace the Uno and fiat badges with nickel coated one, this will give uno a fresh look from the back , then side and front repeater with a clear one ,
