General Speedo sensor parts HELP!

[Jay A]

Hi I am trying to track down a speedo sensor (I think it's a sensor or driver ?!?!?) for my 2002 fiat ducato motor home. I've tried ebay, fiat dealership, scrap yards and europarts but no joy..... I've tried to attach photos of the parts. I've attached a diagram and image of the parts. The VIN number of the van is ZFA23000006168641. It's a 1.9td.

I need parts 1, 2, 4, 5 and 6 on the diagram. Any help would be very gratefully received. I'm at my wits end.

 

[Ocwobio]

Is this a 1.9, 2.0, or 2.8 (IDTD) or whatever? Don't forget Citroen Relay and Peugeot Boxer use the same engine, and maybe Iveco too? I suppose you have done it already, but put the part number, no description, in a search engine, if looking on ebay, widen your area to worldwide. If the shaft on the gear is the only broken part, (are the rest merely missing?), then maybe you could drill out the gear and fit a new shaft? I did think get one 3d printed, but I suspect that wouldn't last 2 minutes. Is the shaft plastic, moulded in one piece with the gear? Accurate drilling would be needed, I have a very small lathe which I would use if doing this. Not much help, sorry. Try also facebook market place , I saw someone breaking an old 1.9 duc about 3 weeks ago. There is currently a Citroen 2.8 in Milton Keynes on there, and others too.
maybe these folks might know something? https://www.facebook.com/marketplace/item/358317613061211/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:ea756146-f5b0-42bf-842a-f3e2ddfa1ab0
Maybe here, too? https://www.facebook.com/marketplace/item/1163174121194097/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:ea756146-f5b0-42bf-842a-f3e2ddfa1ab0

 

[Jay A]

Is this a 1.9, 2.0, or 2.8 (IDTD) or whatever? Don't forget Citroen Relay and Peugeot Boxer use the same engine, and maybe Iveco too? I suppose you have done it already, but put the part number, no description, in a search engine, if looking on ebay, widen your area to worldwide. If the shaft on the gear is the only broken part, (are the rest merely missing?), then maybe you could drill out the gear and fit a new shaft? I did think get one 3d printed, but I suspect that wouldn't last 2 minutes. Is the shaft plastic, moulded in one piece with the gear? Accurate drilling would be needed, I have a very small lathe which I would use if doing this. Not much help, sorry. Try also facebook market place , I saw someone breaking an old 1.9 duc about 3 weeks ago. There is currently a Citroen 2.8 in Milton Keynes on there, and others too.
maybe these folks might know something? https://www.facebook.com/marketplace/item/358317613061211/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:ea756146-f5b0-42bf-842a-f3e2ddfa1ab0
Maybe here, too? https://www.facebook.com/marketplace/item/1163174121194097/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:ea756146-f5b0-42bf-842a-f3e2ddfa1ab0

Many thanks for taking the time to post your answer. I really appreciate it. I will definitely look in to some of your suggestions. Especially following up with Citreon and Peugeot. Thanks again.

 

[Jay A]

Many thanks for taking the time to post your answer. I really appreciate it. I will definitely look in to some of your suggestions. Especially following up with Citreon and Peugeot. Thanks again.

Is this a 1.9, 2.0, or 2.8 (IDTD) or whatever? Don't forget Citroen Relay and Peugeot Boxer use the same engine, and maybe Iveco too? I suppose you have done it already, but put the part number, no description, in a search engine, if looking on ebay, widen your area to worldwide. If the shaft on the gear is the only broken part, (are the rest merely missing?), then maybe you could drill out the gear and fit a new shaft? I did think get one 3d printed, but I suspect that wouldn't last 2 minutes. Is the shaft plastic, moulded in one piece with the gear? Accurate drilling would be needed, I have a very small lathe which I would use if doing this. Not much help, sorry. Try also facebook market place , I saw someone breaking an old 1.9 duc about 3 weeks ago. There is currently a Citroen 2.8 in Milton Keynes on there, and others too.
maybe these folks might know something? https://www.facebook.com/marketplace/item/358317613061211/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:ea756146-f5b0-42bf-842a-f3e2ddfa1ab0
Maybe here, too? https://www.facebook.com/marketplace/item/1163174121194097/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:ea756146-f5b0-42bf-842a-f3e2ddfa1ab0

I need parts 1, 2, 4, 5 and 6 on the diagram above. They are all broken.

 

[LandyAndy]

Maybe worth asking if anyone has a 3d printer.

 

[Anthony489]

Hi

Gear pairs offered on ebay, any good ? https://www.ebay.co.uk/itm/16557461...55-0&campid=5338722076&customid=&toolid=10050

 

[Ednic]

I have no knowledge of these people but they seem to indicate availability for the part number. It would be worth contacting them for clarification.

allcarpartsfast by Endon Services - Shopping Cart

We ship every available genuine Ford, VW, Audi, Seat, Skoda, Peugeot, Citroen, DS, Vauxhall, Opel, Toyota, Lexus, Renault, Nissan, MG, Rover, Hyundai, Mitsubishi, Volvo, and Tata, and aftermarket parts worldwide at discount rates. A family business, established in 1977.

www.allcarpartsfast.co.uk

 

[Jay A]

I have no knowledge of these people but they seem to indicate availability for the part number. It would be worth contacting them for clarification.

allcarpartsfast by Endon Services - Shopping Cart

We ship every available genuine Ford, VW, Audi, Seat, Skoda, Peugeot, Citroen, DS, Vauxhall, Opel, Toyota, Lexus, Renault, Nissan, MG, Rover, Hyundai, Mitsubishi, Volvo, and Tata, and aftermarket parts worldwide at discount rates. A family business, established in 1977.

www.allcarpartsfast.co.uk

Thanks for your help.

 

[Jay A]

Hi

Gear pairs offered on ebay, any good ? https://www.ebay.co.uk/itm/16557461...55-0&campid=5338722076&customid=&toolid=10050

Thanks for your help Anthony. It's amazing how much people feel they can charge for these now as they are discontinued.