General "Spacers" for brake hoses

[fiat1100d]

Does anybody know where to find the plastic "spacers" used on the front brake hoses?
Last January I had the hoses replaced and today I fortunately discovered that the new ones tend to rub on the frame depending on the wheel angle, because they have less of these "spacers" than the original hoses. These plastic parts clip on the hose, but it seems that FIAT doesn't have them as spare parts
Will have to go to a scrapyard looking for brake hoses if I can't buy them new

 

[custard]

if they are little white round plastic bits then the centos and i guess most fiats use them

 

[1383matt]

do you mean the two white rings on the top half of the hose in the pic? the ones above the three blue clips?

 

[fiat1100d]

do you mean the two white rings on the top half of the hose in the pic? the ones above the three blue clips?

Exactly!

 

[custard]

Exactly!

same on the centos so will still be available from fiat or scrappies

 

[fiat1100d]

same on the centos so will still be available from fiat or scrappies

Will have a look at scrappies, FIAT spare parts dealer, after a look at ePer, told me those rings aren't available as spare, but are only supplied together with brake hoses...

 

[1383matt]

just pop some off some old hoses at the scrappy.

 

[fiat1100d]

Took them off a Marea SW.
They are different: the ones I had where of hard plastic, the ones from the Marea are of a softer one, I hope they will last on the Tempra for years to come!