Technical resetting sensors?

[ackerbilko22]

Hello,

I recently took my 04 reg Multipla 1.JTD for a basic service & clutch master cylinder seal/spring renewal etc.

When I picked up the car I was surprised to find that the lcd screen on the dash kept flashing that the oil level was too high.
I asked the garage owner to lower the level before I drove off, but he said he would "do it next week"

When I drove off, the clutch low level alarm was also activated.

When I checked, both the clutch level was ok & the oil level was NOT too high, but the sensors are still showing that the levels are wrong?

Any ideas anyone?????


ackerbilko22

 

[Pandabloke]

I have found that the oil level warning is very temperemental. If I face uphill it says one thing and down hill another! Ignore the blasted thing, I do. Same with the warning for water in the diesel filter. There isn't, don't worry. Just let the computer go through its little routine before starting the engine and all will be fine, it probably won't show any faults.

However, never had a clutch warning light come up so can't help with that one.