General Rear bumper
- Thread starter Guydickinson
- Start date
Currently reading:
General Rear bumper
2014 it's not a panda 169 your accidently posted in the wrong section
Anyhow let me see what a can find
Back shortly
Anyhow let me see what a can find
Back shortly
Guydickinson
Member
I think it might. Many thanks!
Does anyone know where to get the little caps that blank the holes off on the underside of the body, I'm a couple missing.
RUST in NSR sill from jacking arrow back | FIAT Panda (Mk3)
I ordered from eBay. I will send a link a little later My supplier not there anymore but I can tell you mine were 12mm and fit nicely. I just searched rubber blanking plugs and there are lots. I paid £1.29 for 10 plugs
www.fiatforum.com
There's often a couple missing from new
Missing Grommets | FIAT Panda (Mk3)
A freind warned me he had missing grommets on the underbody of his brand new Panda behind the front wheels. He went to his dealer who checked lots of their cars and found the same. They found some grommets (presumably off another car) and fitted them. It's a hole used by garages' four point...
www.fiatforum.com
There’s an older post about this that seemed to confirm two of the holes are not capped when they leave the factory…
Last edited:
And to the original question:
Fiat Panda rear bumper tow eye cover 735605513 | eBay
This is a Fiat Panda rear bumper tow eye cover with the part number 735605513. It is designed to cover and protect the tow eye on the rear bumper of the Fiat Panda.
www.ebay.co.uk
This post contains eBay links which may earn a commission at no additional cost to you.
