Technical Rattling from rear brake caliper over rough surfaces

[bsks]

Hello guys

My rear brake caliper is rattling when going over any road imperfections.
When i move it by hand its moving up and down and making the noise. Everything is tightened correctly, the sliding pins are greased and moving without a problem, and the rubber bushing inside the upper one is new. Any suggestions?

Thanks in advance.

 

[aschiuta]

Hello guys

My rear brake caliper is rattling when going over any road imperfections.
When i move it by hand its moving up and down and making the noise. Everything is tightened correctly, the sliding pins are greased and moving without a problem, and the rubber bushing inside the upper one is new. Any suggestions?

Thanks in advance.

The caliper dont move up and down only inboard outboard. Look at the caliper support. There are two screws that must be tightened a lot.

 

[bsks]

The bolts on the support are also tight.

 

[bsks]

Oops! You were spot on. It appears the support bolts were indeed not tightened. Honest mistake of mine

 

[aschiuta]

Oops! You were spot on. It appears the support bolts were indeed not tightened. Honest mistake of mine

Check screw for all suports wheels. On front wheels is very dangerous to have not tightened supports.