General Project Peterborough

Currently reading:
General Project Peterborough

damn some nice RARE spares in that!

looks pretty good. hows the sills?

The outer sills look perfect. Bloody Waxoil everywhere. ;)

The inner lip looks a little crusty in places but I can soon cut that out and replace the lip.


Old car old bodges.

The exhaust back box. As well as being held on with black silicone...

mkimeCtV.jpg


...it was welded by someone who fed liquid metal to a pigeon and got it poo along the subject and parent metal.

sQuvOPQG.jpg


3V6QxVwH.jpg


j5Im402c.jpg


The new box took ten minutes to fit. I recon those bodges would have taken a lot longer. Talk about false economy. :rolleyes:

Anyway the reason I had the car up on ramps was to replace the perished flexihose to the rear axle. This has also been bodged at some point and the replacement hose supplied is the wrong one. :(

I'll pop over to Wisbech engineering to get a stainless braided one custom made for the car when I jack it up. ;)
 
The decadence continues. This car is spoiling me rotten.

6M1NKdhU.jpg


Brake servo and the black box distributor is much smoother running than the points and pins one. Even though the car is gears for about 55mph flat out and is dragging an axle behind it she's a perky little bus.

I mentioned jacking the car up earlier. The original plan was to make longer leaf spring hanger straps...

YlQ1zgNg.jpg


...but this would be counter productive and foul the tow bar brace if it were any longer. So 30mm blocks and longer "U" bolts it is then. ;)
 
I'd forgotten just how crap standard Panda headlights are. The full Moon was brighter than main beam. :D

I've decided against bull bar ballast if you'd like the bars and bits for Fallout. :)
 
crap I forgot completely about that! have I lost dibs? to be fair i'm probably quite low priority, as I can't see me recon'ing my spare/knackered box anytime soon!

oh it waas you that wanted it was it!! i know it involved some kind of warrior or knight or something like that :eek:

no no you can still have it, it is still waiting for you man :)
 
Non-smoker my arse! :bang:

JvLNR2M1.jpg


I should have made sure the door was shut properly. ;)

Still I drove a car to work today...

QzizdD7e.jpg


...and I'll be taking my van tomorrow. I wonder if anyone will notice. :devil:

I did wonder. I have a 750 gearbox and Cinquecento Sporting gearbox if the diff's from wither of those could be made to fit. I'm pretty sure it would mess with your ratios though.

These...

http://www.ebay.co.uk/itm/120x120mm-LIMITED-TO-50-MPH-Vehicle-speed-restriction-sticker-VAN-WAGGON-/251146540821?pt=UK_BOI_ProtectiveGear_RL&hash=item3a79801715

...are on the back of the car as well now. Flat out the van's only good for 58-60mph. ;)
 
This post contains affiliate links which may earn a commission at no additional cost to you.
Back
Top