Problem with bilstein b4s and eibach pros on stilo

[bikerben]

Hi, new to the forum, i have a 2006 stilo 1.4,

When i boughy it, it had standard shocks and cobra lowering springs, when the mot came round they found the 2 rear springs were snapped so i decided to replace the springs and shocks,
I put bilstein b4s all round and eibach pros on, however the front end is now sitting around 30mm higher than the rear end is, according to eibach iy should be 360mm from middle of wheel to arch on the rear and 350mm on the front, the rears are fine sitting at 360mm but the fronts sit at 380mm , which is making it drive like a boat and handle awful! The garage is adamant that there fitted correctley and motorsport world is adamant that they sent out the correct parts! Any ideas?

Thanks, ben

 

[fingers99]

See if you can get the full specs from Eibach -- my guess is you've springs for an Abarth or a weasel.

Malfittage should be pretty obvious -- the spring won't be correctly placed in the top cup.

 

[bikerben]

Ive checked the serial numbers on the springs against motorsportworlds system and they say everythings correct! Its really confusing me! The only thing i can think of is if the serial numbers have been printed wrong or maybe the spring seats on the shockers are too high? Maybe the wrong shocks but the serial numbers on them too have been checked!