Linea Please Help Mil Light at high rpms

Currently reading:
Linea Please Help Mil Light at high rpms

Kelhamla

New member
Joined
Sep 5, 2020
Messages
11
Points
2

Hi guys. I'm new to the forum and I have been facing issues with my 2014 linea 1.4 fire. Car goes into into limp mode at high rpms and engine starts to stall. It limits the rev to 4000rpm and when I stop the car and start again problem is solved but it continues at high rpms. Engine limits the revs. :mad:How can I fix this issue?
 
Read fault codes using code reader.
Though could be cylinder/s misfire.
When was it last serviced? How many miles since spark plugs changed?
How many miles had car covered?
 
Fault Codes p301 302 misfire and i changed the spark plugs 2 times but no luck. The car works fine but if it reaches high rpms it start loose power and limit itself to 4000 rpm.
 
If engine ecu detects missfire it is meant to enter limp mode to protect car from damage.

Have you changed the ht leads and coil pack/s?

Did you put new spark plugs in or used spark plugs?

What brand of spark plug have you fitted?
Are they the correct part number for your engine?
 
Last edited:
Change spark plug leads and coil pack/s.
170,000 km is not a lot if engine has been cared for -serviced regularly
 
Last edited:
I changed all spark plugs, spark cables, and the coil i am thinking ot may be a phonic wheel or self adaptation or bad timing belt
 
Back
Top