Please Help A Noobie !!!

[bc23air]

I Am Sorry To Bother You But I Am In A Mess With Some Alloy Wheels I Have Bought From Ebay For My Fiat Punto 2000 , 1.2 , 3 Doors
They Were From A 97 Clio,and I Have Checked After I Have Bought Them That The Pcd On Them Is 100,and Punto's Are 98.
Also The Nuts Are A Bit Larger In Size.
I Want To Buy A New Set Of Alloy Wheels Nuts But Will They Fit On Punto?
Thanks Very Much
And Sorry For The Caps

 

[custard]

no bother

what you need is wobbly bolts to bring the pcd into line.
wait for the wheel knowing guys to confirm.

welcome to the forum

 

[PNL]

You can fit the 100pcd wheels to your Fiat just get your self a set of wobberly bolts just make sure the off set is correct though

 

[bc23air]

thank you so much guys ,i owe you big time.
the offset of the alloys as i have seen on a site www.alloyguide.co.uk is 35 to 38 and puto's is 25 to 38. It looks ok to me.
And again thank you very much indeed,keep up the good job

 

[crazydave]

welcome to the forum, this is true u will need wobberly bolts, they are pretty easy to get i believe

crazy

 

[Fiat Fan]

welcome, looks like the guys have got your problem sorted

 

[bc23air]

for the last few hours i am trying to find a set of 16 wobbly bolts but i get confused with every step i make.
i found a few on ebay :
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8059941322&rd=1&sspagename=STRK:MEWA:IT&rd=1
,but i see there M12 X 1.50 OR M12 X 1.25.
I am really confused.Maybe someone who used these kind of wobbly bolts for a fiat as mine can walk me through.
Thanks again and sorry for being a pest

 

[custard]

IIRC there 1.25 on the cinq but i would need to check

 

[PNL]

for the last few hours i am trying to find a set of 16 wobbly bolts but i get confused with every step i make.
i found a few on ebay :
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8059941322&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1
,but i see there M12 X 1.50 OR M12 X 1.25.
I am really confused.Maybe someone who used these kind of wobbly bolts for a fiat as mine can walk me through.
Thanks again and sorry for being a pest

You can get a set of wobbly bolts at hellfrauds or any half decent accessory shop mine cost me £29 from a local place well it was local to my daughters at the time but 14 miles from where I live

 

[bc23air]

I have finally bought the woobly bolts,all good but when i went on the motorway my car was shaking like a belly dancer so i balanced the wheels and the guy that did it told me that i would need a ring(something with a Z),so the wheel to stay fix.
I found a service that deals with alloys and he put 2 of them but they are a bit loose not much.
when i get back on the motorway at 75-80 mph it's still trembling i can feel vibrations in steering wheel ,pedals.
Should i get a new set of 'Z' rings fixed ones ?would that do the trick.
I have also balanced only the front wheels.Could the back wheels be the problem?
Whitout balancing and ring the car was trembling at 40mph.
Any help and advice would be apreciated as i have run out of options but to go back to the old wheels
Thanks a lot

 

[bc23air]

i will give up and put back the old wheels
life is a bitch sometimes