Technical oil filter from sct germany

[andy1]

Hi pandaers

I was wondering if anyone has any experience with products from http://sct-germany.de/en/ ?

I have a Panda 1.3 Multijet 51kw 70cv and was considering buying this oil filter http://www.ebay.it/itm/1xOlfilter-S...523118?hash=item33a00cc36e:g:NL4AAOSwNSxVF70Q

 

[SB1500]

If they say 100% it's compatible with the Panda and your engine then you cant go wrong!

To be honest, everyone says one brand is better than another but in practise it's very hard to tell. If they say it'll work chances are it will work fine and give you no problems!

I use genuine Fiat parts where possible, you can get one on eBay for the Panda for a few pound more than the typical / Bosch aftermarket ones

I'm sure somebody on here has experience with them, good luck!

 

[andy1]

Thanks for the input man Appreciated!

 

[tinmar49]

Be careful, there are two different oil filters for the multijet.

 

[tinmar49]

Go to the Shop4parts website, it shows both types.

 

[Peter Pick-Up]

Just buy your parts here:

http://www.mister-auto.it/it/


And with German Bosch quality products, you can't go wrong at all...!!

 

[ytareh]

As far as I know the early 2005 has the oil filter without 'chimney' .The one in pic HAS a chimney on top ....Be careful .( then again pic may not be exactly what you get )

 

[hub61]

Its only an oil filter so not huge money so go to your local motor factors and buy an aftermarket equivalent, if its not the correct one you can change it.