need help

[AllanLarsen]

Caralarm vs Fiat Panda

Hi everybody... My name is Allan and i´m from Denmark and i hope that someone can help me.

I´m a owner of an brand new Fiat Panda 1.2e Ciao year 2010 and this car came whitout remotecontrolled centrallocksystem....

I would like to install a 2 ways LCD caralarm and i need to know are the door controlled by the canbus or can i hook up the remotecontrolled alarm to the bodycomputer whitout any foul ??

The caralarm i wish to bay is an Magicar M870AS..
Does someone help me or guide me..

 

[Most Easterly Pandas]

Re: Caralarm vs Fiat Panda

Hi there, have a search in the Panda section as there is a fair bit of info in there, basically its very hard as the drivers door doesn't have a central locking motor in it

Jon.

 

[AllanLarsen]

canbus H og L

Hi and sorry for my poor english. I´ve a question about the canbus High and Low in my brand new Fiat Panda 1.2 E Ciao year 2010.

I need to install a caralarm, and the module that came with the alarm need a H og L connections to read/write. The manual says that:

Black Can-L connct to the 2 wire canbus ( do not connect if the one wire canbus used
Black/red Can-H Connect to the 2 wire canbus (if one-wire canbus used, connect to the 1/10 wire )

Is my car one or two wire in the canbus ???

Hope that someone CAN help me

Allan

 

[Most Easterly Pandas]

Re: canbus H og L

Have you a link to the alarm online somewhere?

Ta.

Jon.

 

[MR_TOAD_INSTALLER]

Re: canbus H og L

Hi and sorry for my poor english. I´ve a question about the canbus High and Low in my brand new Fiat Panda 1.2 E Ciao year 2010.

I need to install a caralarm, and the module that came with the alarm need a H og L connections to read/write. The manual says that:

Black Can-L connct to the 2 wire canbus ( do not connect if the one wire canbus used
Black/red Can-H Connect to the 2 wire canbus (if one-wire canbus used, connect to the 1/10 wire )

Is my car one or two wire in the canbus ???

Hope that someone CAN help me

Allan

Pink/white and pink/black
rear of fuse box
Ian

 

[AllanLarsen]

Re: canbus H og L

Jon...

The link i have dosen´t show much about the alarm, but i have a diagram that show a lot more.. but i don´t know how to upload the pic. to this topic.

And i allready found the pink/white - pnk/black on the diagnosepin. But what i need to know is:

How can i see if the canbus is one or two wire ??

 

[MR_TOAD_INSTALLER]

Re: canbus H og L

Jon...

The link i have dosen´t show much about the alarm, but i have a diagram that show a lot more.. but i don´t know how to upload the pic. to this topic.

And i allready found the pink/white - pnk/black on the diagnosepin. But what i need to know is:

How can i see if the canbus is one or two wire ??

2 Wire

Ian

 

[Most Easterly Pandas]

Re: canbus H og L

Jon...

The link i have dosen´t show much about the alarm, but i have a diagram that show a lot more.. but i don´t know how to upload the pic. to this topic.

And i allready found the pink/white - pnk/black on the diagnosepin. But what i need to know is:

How can i see if the canbus is one or two wire ??

Is it possible to post the link please (is the alarm avaiable to buy off the internet?) as I'm interested in buying one

Jon.

 

[AllanLarsen]

Attached file.. please check it out and tell me what B canbus A and B canbus B means... is it a singel wire canbus or twisted wire ??

Or am i wrong ??