Need a part No

[Andy]

as title, i need the part number for the gearbox mount for my 1.2. its the mount thats at the back of the box and geos to the subframe at the back of the engine bay.

where ive had my box replaced so many times, and after replacing it at the weekend i found that the top bolt has threaded as its only ali, so want to get it replaced asap as i have put a hole in the bolt and split pinned it to keep it relatively in situe for the mo

Cheers folks

Andy_sx

 

[Anonymous]

Take your chassis number with you to Fiat they will find the right one for you.

Joske

 

[Tom]

Get it helicoiled, will cost you ~£10.

 

[Andy]

Tom, if i get it helicoiled, would i not need a bigger bolt? thing is that i cant have a bigger bolt due to the lack of tollerance in the gearbox.

i may be completley off the mark here though

 

[Sven]

Andy is this what you need ?

Members Site - - - - - - - My Site

 

[Andy]

thats the one thanks Sven, part no 1 on the list

cheers mate, once again youve come up trumps for me

 

[irishbravo]

Did that come from a web site if so can i have it please.

 

[Tom]

No, a helicoil will return it to the original size but with a nice steel thread.

 

[Andy]

aha, i see now

way off mark as per, thanks Tom. will look into getting that done. who would i need to speak to (generally speaking of course)

 

[Dan]

irishbravo, thats from the fiat eper disk

Dan

 

[irishbravo]

emmm must get me one of them.

 

[Tom]

Any engineering workshop should be able to help you.

Take in the part and the bolt.

 

[Andy]

thanks for all your help guys.

the part is £28 from fiat, and might be getting a discount on that aswell as the guy that helped me replace my box uses them alot and is friendly with a guy in the parts department.

Cheers again

Andy