Technical multiecuscan "oil pressure not ok"

[merovingian]

Was running in live data with engine running and in Parameters got this message. Oil level is fine, engine running fine, no codes, why does it say this.
I'm a newbie on Multiecuscan!

 

[varesecrazy]

Hi

We need more info..

What year..what engine??

Why were you looking..and WHERE were you looking..?

I take it its the latest version of MES

 

[merovingian]

Yes latest version, 2.8jtd 2004 Hymer B584 Motorhome
I was primarily looking for an intermittent ASR/ABS fault which triggered the dashboard lights when driving over bumpy ground, obviously a faulty connection.
The fault was in memory, said to clear it and keep an eye.
Apart from that I was just ticking all the boxes, run the engine to see what was what, I used the free version before which limits you to 4 things at a time, so I was playing really!

 

[varesecrazy]

Using OBD port..?? Or still on 3 pin?

 

[merovingian]

no obd2

 

[varesecrazy]

2004 is EARLY so functions could be limited..

As you say it sounds like you have a poor connection somewhere..

But think the oil warning is a random error

 

[merovingian]

Yes, I wasnt too concerned as the oil pressure warning light is there at startup and goes out after a few seconds. Any pointers about the asr fault, are there speed sensors on all 4 wheels or just the front 2?

 

[varesecrazy]

Errr

ABS uses all 4 wheels.. so 4 sensors
I assume its the same tech

 

[merovingian]

Thats what I thought it's just that a local mechanic said nah just the front 2. I suppose until I get a code it's impossible to determine where the fault lies. With a little luck it will never reappear, you never know with cheap Fiat electrics

 

[varesecrazy]

Rotors..or built into hubs?

 

[varesecrazy]

Errr

ABS uses all 4 wheels.. so 4 sensors
I assume its the same tech

Showing 4 sensors..

https://www.fiatdalys.lt/en/catalog...6/0/GD/hydraulic-brake-control-with-antiskid-