General Mk 2 Uno front indicators

[phatboy130]

Hi folks

Whats the easiest / correct way to replace the bulb on the front indicators, as they are unlike the mk 1 with 2 screws, and knowing fiats lights lenses, nodoubt the clip or something will snap off if you don't do it a certain way, I have replaced several rear lenses over the years, but never tackled the front ones ( oh and I can't be bothered to drive an hour to pick up my uno manuals lol )

Cheers, Jay. :slayer:

 

[alexGS]

Jay,

Please see attached - have a long, thin screwdriver and go carefully from the back. To release the tab it may help to push the light unit inwards, gently but firmly.

-Alex

 

[phatboy130]

Many thanks Alex, will have a ( careful ) go

Jay

 

[Morty Mort]

Please see attached - have a long, thin screwdriver and go carefully from the back. To release the tab it may help to push the light unit inwards, gently but firmly.

I've done this a couple of times aswell, but I pushed the screwdriver in from the front, and pulled the light unit out. Hehe, have I been lucky each time not breaking anything? Well, it worked at least. Put a thin screwdriver in the middle, fiddle as you are searching for the g-spot, (do NOT use a screwdriver for that) and ta-daa, indicator off. Something tells me Alex is spot on how to do this one. I've never thought of going in from the back.

Morten.

 

[alexGS]

Put a thin screwdriver in the middle, fiddle as you are searching for the g-spot, (do NOT use a screwdriver for that) and ta-daa, indicator off. Something tells me Alex is spot on how to do this one. I've never thought of going in from the back.

Morten.

<<groan>>



-Alex