Technical Missing under load.

[Hellcat]

Over the last few days the milkbottle has started misfiring under load. Revs fine in neutral, and seems to pull find over 80 leptons. 3rd gear pulling under 3k rpm seems to give the most jerky acceleration.

Suggestions?

 

[Hellcat]

Plugs and rotor changed. New leads and dizzy cap on order.

Isn't missing under load anymore, but the engine management light is on constantly, and it takes a second or two longer to start than it used to.

 

[Hellcat]

Engine stopped fully. Weak spark so took all the HT side apart, cleaned thoroughly and refitted. Working again.

Can't have done a good job first time around. Can't wait for the replacement HTs. These ones I've got are crap.

 

[Hellcat]

All done now.

Plugs, HT leads, Dizzy cap and Rotor arm replaced. Idle valve removed and cleaned. Running nice again.