General Lowering spring fitment required

[alex.beckett]

Hi,

I have a set of four lowering springs which i would like fitting to my Bravo.

All my usual places want to charge me a fortune for this job so is there anybody on here that can fit them for some cash or If you know anybody that can do...

Any help much apprechiated
Thanks.

 

[gareth.j.h]

I have the same problem... ive been quoted £90. Ive been told it only takes about 90 mins! If anyone in South Wales area wants to fit mine for a decent price, pm me

 

[jug]

its pretty easy, but isnt everything when you know how. get a haynes manual to see how its done. if you then think you can do it get some spring clamps and dive right in.

the rear is really easy, all you need is a jack and a socket set, so at least do the rears yourself. then a garage wont chanrge as much to do only the front.

 

[alex.beckett]

To be honest id rather have them all fitted together, but if its simply a case of just jacking up the rear and using a socket i could give it a go.

 

[JoskeJTD]

Yep, do the rears yourself. The fronts require compression clamps, its a bit of a risky job to do as a amatuer.

 

[alex.beckett]

Do you have to access the boot to do the rears at all?

Thanks

 

[distortionrockets]

no the rears are all done underneath by jacking up the car. use the search function there are plenty of guides avaliable. its an easy 20-40min job depending on how hard the bolts are to undo.

IMO £90 isnt a bad price. i paid £60 for just the fronts to be done.

good luck!