I am having problems with the lights on my Panda 1985, 4x4.
Basically, everything was fine then when I recently went to main beam, only the passenger side would come on, the drivers side just being the sidelight.
I checked fuses, all ok
I checked the bulbs - both sides fine
I cleaned up some of the earth contacts in the engine bay
Still the same.
Both driver and passenger side lights are fine on sidelights and dipped, the only problem being when I come to main beam.
I have taken off the steering wheel to see if anything untoward there but everything fine.
I swapped over the strange coil of wire thingey that sits near the suspension turret in the engine bay for the one in my other Panda 4x4 and low and behold the drivers side now comes on when I switch to main beam but now the passenger side doesn't come on!!!
Any ideas!!!!!!??????
Basically, everything was fine then when I recently went to main beam, only the passenger side would come on, the drivers side just being the sidelight.
I checked fuses, all ok
I checked the bulbs - both sides fine
I cleaned up some of the earth contacts in the engine bay
Still the same.
Both driver and passenger side lights are fine on sidelights and dipped, the only problem being when I come to main beam.
I have taken off the steering wheel to see if anything untoward there but everything fine.
I swapped over the strange coil of wire thingey that sits near the suspension turret in the engine bay for the one in my other Panda 4x4 and low and behold the drivers side now comes on when I switch to main beam but now the passenger side doesn't come on!!!
Any ideas!!!!!!??????
