Alright guys im bit confused on where the jacking points are on my Punto MK2 2001 Sporting. Can anyone help me.Got a trolley jack and axle stands where 2 place them etc.
Kind Regards
Kind Regards
Technical Jacking Points
- Thread starter Brad G
- Start date
Currently reading:
Technical Jacking Points
- Joined
- Aug 13, 2006
- Messages
- 3,246
- Points
- 606
Front jacking point is the bottom of the transmission housing, put the axle stands on the scissor jacking points underneath the sills (look for the arrows on the sill). At the rear, jack up using the middle of the rear beam, and use the rear scissor jacking points for the stands. Use a block of wood on the trolley jack to minimise damage to the car.
Whatever you do, do not use those things that look like jacking points underneath behind the sills. My older car was well ventilated after using one of those, and putting a jack through the floor!
Where not to jack
Whatever you do, do not use those things that look like jacking points underneath behind the sills. My older car was well ventilated after using one of those, and putting a jack through the floor!
Where not to jack
