Panda Identify Sensors

Currently reading:
Panda Identify Sensors

John Perry

New member
Joined
Aug 27, 2016
Messages
9
Points
3
Hi everyone
Can anyone tell me what the two sensors are on the side of the throttle body on fiat panda 1.1 2010 please?
Just discovered a broken orange wire on the sensor on the left of the picture!

Thank you
 

Attachments

  • F253DF9A-EC8D-4486-8374-3FD8D4A89658.jpeg
    F253DF9A-EC8D-4486-8374-3FD8D4A89658.jpeg
    1.2 MB · Views: 204
Hi there
Thanks for info
These have caused me a headache for 4 weeks along with a broken cable on the TPS.

Decided to change throttle body with sensors in place as I can’t seem to separate these sensors from the body ???
The
 
Hi there
Thanks for info
These have caused me a headache for 4 weeks along with a broken cable on the TPS.

Decided to change throttle body with sensors in place as I can’t seem to separate these sensors from the body ???
The

there's pushed in. But nothing to pull on.


if you put a Hose clamp around them you can lever them out with a screwdriver.


Mark everything carefully First. But from memory they only fit one way but could be wrong.


be careful diagnosing TPS errors


a miss match between the throttle pedal and throttle position sensor can throw the same code



we seen a couple of throttle pedals fixed by compressed air along with a couple changed recently. And I have seen the connector corroded and gone green
 
Back
Top