Here you go
This is how it was described I beleive by Bennyboy. Credits to the author
"Removing the front bumper
There are 3 screws that hold the splash panel/inner arch lining on, undo these & you should be able to ft your hand inside.
There is an 8mm self tapping screw & a T30 torx bolt, undo these & remove & repeat the process on the other ide of the car.
There are 4 T30 torx bolts just above the grill, undo these & remove. Hope you don't mind getting dirty(no jokes please! ) Get on the floor & underneath you will see 2 10mm bolts that hold the front of the undertray on, remove these & you will see 2 T30 torx bolts underneath, remove these & the 2 on the ends of the bumper & it should pull free!"
Sounds like fun!