Technical How Do You Change A Fiat Uno Mia 1100 Clutch Kit

[maxi26]

cant get my system to bleed. noticed the old under steering leak again took out both master and slave to have a mec look at it. i somer want him to test it there before i hook it up to the car

 

[maxi26]

hi guys,

unfortunately i am stil struggling to bleed my clutch system. is there anyone here that would help me in answering a few noob questions.

1: which way should the rubbers/seals inside the master and slave cylinder face
2: a two men bleed technique that actually works

thank you all

 

[maxi26]

hi guys,

unfortunately i am stil struggling to bleed my clutch system. is there anyone here that would help me in answering a few noob questions.

1: which way should the rubbers/seals inside the master and slave cylinder face
2: a two men bleed technique that actually works

thank you all

even with the slave cylinder disconnected, me pulling back the release bearing fork the gears wont go in.:bang: because thats what the cylinder is there fore?

i am thinking now its n proble with the release bearing thats not correct, but it fitted nicely when i installed it. :bang:

i so frustrated and would rely need the extra help from you guys right now!

 

[maxi26]

fitted new master cylinder, but!

on bleed gears go in, after short while wont go in,

Question: did i refit clutch plate in wrong way?

 

[a73uk]

I`ve never put a clutch in the wrong way round, but I`d imagine it`d give you more serious & constant issues, not problems that come & go.

Sounds more like a clutch actuation problem to me, is the slave piston moving the fork enough? Does it come out further after its been bled then gradually come out less? If so there may still be an air leak somewhere.

 

[maxi26]

yes i bled the system 3 or 4 times.my local mec has made up his mind that i fitted the the clutch plate the other-way round in.