Image_350_.jpg

Cinquecento GhostWKD's Turbo Cinq 56k warning

Introduction

July 2005 – The beginning

The date was the 19th July 2005, I’d had a argument with parents about engine swap in my Seicento which my step-Nan had funded, so decided I wasn’t going to let anything get in my way when I found a turbo cinq for sale on auto trader, so at a monumentous cost of £1,700 I owned a shed of a turbo cinq… (spot the seicento in drag strip mode lol borrowed tyres and std rims Lol)

Image_350_.jpg

Image_351_.jpg

Image_398_.jpg


Decided the wheels just didn’t suit the thing and fitted my Compomotive ml’s I had already and I also repaired the rear engine mount and fitted magnecors… all within the first month lol

August 2005 – The service/oil…stuff…

Bought a low temp fan switch, oil filter & oil, and oil cooler setup from think automotive (mocal) none of it fitted until september, except the rear engine mount bought in july… as it kind of fell apart driving around near a friends house… that’d be my first breakdown in it then technically?

Image_402_.jpg

Image_404_.jpg


September 2005 - Fuel filter, rocker cover gasket and first show!

Well started the month giving her the service she wanted, and sprayed a few goodies in the engine bay silver :D

Image_416_.jpg

Image_417_.jpg


All bling ready for first show, get there and have work on my hands before I’ve even parked up, oil all down the front bumper and all over the engine bay and dripping out of the bottom, oh no! :(

Image_421_.jpg

holy_oily.jpg


But luckily all was not lost, as I was at a fiat event! Sorted the problem as a not properly sealing rocker cover gasket, had instant gasket with me, along with a fresh gasket kicking about, so after a long time looking for the problem I set about fixing it… lots of interest yay, and also lots of criticism (easy to criticise :) plus give me a chance i've only had it a month!)

think_i_broke_it.jpg


So all fixed, and it actually got voted the car peeps would most like to take home, ok so it was mostly my friends voting but heck a turbo cinq gets a lot of attention ;)

Later that month….

Fiatforum weekender yay! Not much work done on car, 14’s went back on due to dodgy tread on the 13’s iirc, no actually was as winter wheels lol :D but well at the fiatforum weekender my car was vandalised and sunroof smashed :( so had a ducktape sunroof for a while lol

Image_446_.jpg

Image_438_.jpg

Image_443_.jpg


October 2005

Random interior pics showing off rear/steeringwheel/hormann pedals :D

09102005_001_.jpg

09102005_002_.jpg

09102005_003_.jpg


started treating to the cinq of a solid days valeting… but I think the results really do speak for themselves

DSC00001_paint.JPG


That pic really doesn’t do it justice, was immaculate! Although I found a problem with her suspension doh!... so on went the apex shocks and spax 60mm springs I had kicking about (well I think I left the rear a while though) only have a pic of the old shock… bit dead lol, this also meant the end of my winter wheels unfortunately, as it kind of sat well *on* the tyre…

Image_432_.jpg

14102005.jpg


Then took her down pod and she did a 16.8 down the strip :)

17102005.jpg


also decided to tint the rear lights…

23102005.jpg
23102005_002_.jpg


Also replaced this month: Handbrake cable, rocker cover gasket, rear wiper blade, replaced sunroof which got smashed last month, oh and window seal which was torn

November 2005 – Fun, Games and manifolds!

German ebay brought me some gorgeous smoor’s :D 7x13 front and 8x13 back, also got 195/45/13 dunlop rubber fitted to them, so sexual! Trial fit (pre tyre) looked a bit daunting though… but I was sooo excited lol

28102005.jpg

28102005_002_.jpg

07112005_003_.jpg



Then disaster struck, as I was going to work, spotted temp at 110… steam pouring out of bonnet, so rushed to work (100 yards away) and rushed to park, in my haste stalled car into kerb (which with car being now -60mm was a lot higher than my bumper… and the manifold took the impact!!!!) so spent a lot of time (and calling in a lot of favours from my best mate who was running manifolds to/from van aaken, cheers alex!!! :D) sorting it all out

12112005_011_.jpg

12112005.jpg

12112005_002_.jpg


Got my new shiney manifold yay

10112005.jpg

10112005_002_.jpg


Cinq looking sad and manifold/turbo-less :(

12112005_007_.jpg


Oh what the fudge…. This isn’t right… oh sugar, studs are wrong!!!!!! (plus wasn’t happy as it still had the original divider in there… so mentioned that when sent it back)

12112005_016_.jpg

12112005_014_.jpg


while they were sorting that I set about finishing the new bumper I had lined up

19112005_001_.jpg

19112005_002_.jpg

20112005.jpg


But before I knew it my best mate and van aaken had a new shiney manifold ready to go on, and go on it did :D (he also left his mark.. cheers alex… or was it me… no pretty sure it was you lol)

19112005_014_.jpg

19112005_009_.jpg

19112005_011_.jpg

20112005_001_.jpg
20112005_003_.jpg


and with that she ran once more yay! Oh and while this was all going on I fitted a 40mm Throttle body also :D (for those who don’t know cinqs, as opposed to a 30mm!)

20112005_005_.jpg

26112005_001_.jpg


also at the end of the month she snapped a coolant pipe bracket which holds the pipe into/onto the water pump fixing, so had that welded up (have pics of course but too many is a bad thing I guess lol) Full service whilst off the road too! :)

December 2005 – Merry Christmas!

Proper trial fit of the smoors, they looked so sexy, but stuck out so much I didn’t even bother moving it too much after lowering it onto wheels (hence rear being high) as I knew it was a lost cause :( but they did look good…

03122005_017_.jpg

03122005_016_.jpg

03122005_014_.jpg

04122005.jpg


and on the 10th day of xmas my cinqy brought to meee… a friend clutch in a cinqeeeee :( missed a gear on a gearchange, then when went into gear, nothing, revved as if it was in neutral :( gutted…. So another ride on the breakdown truck… and what was waiting when I peeked into the inspection panel thingy on the gearbox… nice stuff falling out, friction material off my clutch :(

10122005_002_.jpg

11122005_003_.jpg


but 2 days later I was well on the case and had a EBC Fast road item in my possession… now I cheated with this because it was cold and I’ve done a clutch before, not silly enough to do it again in dead of winter lol

13122005.jpg


And she was back again, though shortly after someone did throw a trolley into her or something at tesco’s :( and cracked the filler out of the rear bumper… while she was getting clutch done I also got another yellow bonnet without the Scooby vent (thanks again to alex) it does have a ripple in it and a few dents but it looks 100x better imo :)

17122005_001_.jpg

21122005_006_.jpg


Also Christmas day came, and friend of mine (chris/bushboy) delivered smooth doors for me which I got off someone who was selling up :D

25122005.jpg


January 2006 – Happy new year!

Ran most of January with no probs, helping other members (arc!) with their cinqs when going to MK meet and things like that :) did however snap a front spring, so on went the koni’s with the dodgy shock temporarily, also don’d some standard cinq wheels in a stealth look while I decided to get my comomotives refurbished

23012006_005_.jpg

24012006.jpg

24012006_001_.jpg


Oh and also sold the smoors *sniffle* kept the tyres to go on refurb’d comomotives though :D

27012006_003_.jpg

04022006_017_.jpg


February 2006 – Hmm getting warmer… yay!

Black top part of dash now on instead of the white… what was he thinking!!! Lol also picked up uno turbo brake setup off a friend of mine, and new 60mm springs… fitted springs and top dash section :) oooh and yellow rear lights imported from germany! Cinq also got a service this month…

10022006_002_.jpg
11022006.jpg

25022006_003_.jpg


March 2006 – Yay getting even warmer lol!

Started the month painting the UT callipers yellow, and playing with a over charging alternator, so swapped that for another

04032006_001_.jpg

04032006_003_.jpg


little did I know my rear bushes job would be so eventful this month… snapped springs, snapped brake lines, also learnt how much of a damn pig those rear bushes are!!! Ended up doing a full rear arm rebuild both sides… but was worth it for the working handbrake lol

18032006_021_.jpg

18032006_015_.jpg


This job actually went through middle of march through to the start of april

April 2006 – Its my birthday this month woo

Carried on with job in hand, got the rear rebuild done, new everything, even back plates! Fitted with my 60mm rear springs also!

04042006_002_.jpg

08042006_003_.jpg


Then the pics once it was back on its wheels :D
08042006_009_.jpg

08042006_011_.jpg

08042006_012_.jpg


Was really pleased with that! :D over the moon infact :D and my yellow samco’s had turned up too and were slowly getting fitted through april :)

27032006_001_.jpg

01042006_007_.jpg


Also had donny south that month but not happy with any pics from there lol so not posting them :D did get tints done there though! And well was happy with some pics from Brooklands Italian car day so have added this one :D shows how much she’s changed at the back anyway

round_the_back_after_hill.jpg


May 2006 - Nothing… yes nothing…

Ok I don’t believe this, I didn’t do a thing in may, think I may have fitted 1 samco which wasn’t there before but not 100% only have pics of car itself not jobs being done… wow!

June 2006 – Gets interesting :(

Sprayed a load of my boost pipes etc black to contrast against the yellow samco’s

04062006_014_.jpg


Also tried to fit my UT kit but that didn’t work :( need 6mm spacer inside the disc not 3mm spacer :( had my 3mm spacers done for this too, oh well, had problems fitting standard kit back on, also burst a braided hose when bleeding standard kit back on… so got a flexi for time being and had a new braided one made up in no time :) Oh and uno turbo single wiper conversion went on also :D

Oh and we also had Stanford hall Italian car day this month, will include my fav pic of the day of my cinqi just for good measure! :D

my_cinq_yay.jpg


July 2006 – Decat time baby!

Ok absolutely nothing went wrong in july, but I did get the cinq its decat with swappable cat section :D just look how neat those welds are! and the noise… just has to be heard to be appreciated! Oh and I had a bit of a issue when up north when stopped off to see mog had a leaky fuel line which had been cut into by the hose clip :( easily replaced though :D

28072006_009_.jpg

28072006_008_.jpg

11082006_003_.jpg


Ohhh and almost forgot also, she was showing at max power too in july :D ;) with Fiatforum naturally lol :D

pose_for_the_cam.jpg


August 2006 – Holiday Time woo!

All I did on the cinq this month was drive it, had a mystery oil leak which turned out to be the oil filter hadn’t been fitted tight enough when I serviced it :) also showed the cinq at donny north! And took her on the sprint strip, good fun!

September 2006 – Nothing again

All I did on the cinq in September was buy a rocker cover gasket in preparation for my chrome/polished rocker cover! Went to the FF skeggy do with her again and no problems this time :) all sorted

October 2006 – Ooooh shiney

With help from mate (Si-Punto) got a snapped cam cover bolt out and fitted my polished/chrome rocker cover :D also had a issue the first weekend into oct with a snapped water pipe bracket and got this welded @ kwik-fit :)

15102006.jpg

16102006.jpg


November 2006 – Pod Pod Pod :D

Went down pod with the cinqi, got her new front and rear bumpers fitted, and well brings us up until today! :)

me_and_chris.jpg


Today (22nd Nov) – Clean

And today she got a clean in the dark… but looks so shiney! And not even had a polish in a while so she’ll get one of those very soon lol :D

Turbo timer, smooth doors, uno turbo brake setup, door poppers and countless other bits all waiting to be fitted… and I will be getting them done all very shortly, ditto the oil cooler and setting up, but overall the future’s bright, the future’s a yellow turbo cinq :D

dsc00195.jpg

dsc00200.jpg

dsc00204.jpg


P.s. this isn’t a comprehensive list, its more of a photo diary so more work has been completed than given here, mainly small things I wouldn’t go taking pics of etc :) but will include everything like this in the future, as I’ll be keeping this thread updated much like duncs progress thread :D
I feel your pain when it comes to the manifold - turbo join blowing, I went through 5 gaskets when I put the uprated manifold on, but some new bolts with spring washers sorted the problem in the end lol :D 5 months and no blowing at all :D

P.S. I love your cinq, if I ever get rid of the starbo a turbo cinq may be my next car lol :p
 
lol starbo was 1 of the alternatives to turb cinq but i love my cinqs too much :D

Got the turbo/manifold back and is sooo nice :D was going to spray it high temp paint in black but well i dont think i have any :( only hammerite smooth which wont be enough on a turbo manifold me thinks :(

will get pics tonight :) and possibly fitted :cool: then onto oil cooler gubbins and possibly UT brakes :D
 
lol starbo was 1 of the alternatives to turb cinq but i love my cinqs too much :D

Got the turbo/manifold back and is sooo nice :D was going to spray it high temp paint in black but well i dont think i have any :( only hammerite smooth which wont be enough on a turbo manifold me thinks :(

will get pics tonight :) and possibly fitted :cool: then onto oil cooler gubbins and possibly UT brakes :D

lol, I moved from a Sei to a starbo so hell of a difference in performance, I should be running around 155-160bhp atm and I think my CV joint is on the way out now :( and its one hell of an expensive bugger to run lol, whats the petrol like on the cinq? just had a catback system put on mine and coupled with my other mods I end up putting 15-20quid in every 2 days lol :(
 
60miles!!! lucky you lmao, I get 25 maybe 30 miles if I drive like a fool and 60miles taking it easy :( but still, I love the car so don't normally think about the running costs lol
 
25 or 30 miles on £10? :eek:

mine does this 60 and that was with this blowing manifold/turbo join :eek:

though i dont know what she does full chat as i never really drive her hard enough for long enough to find out kinda thing :eek:
 
I've got some nice country roads down my way, so always take it for a blast now and then, the petrol gauge isn't a pretty site lol :(
 
i live in middle of said country roads lmao :p

soon she'll be weekend car though, like 2 weeks :eek: urmmm not sure if to give this turbo/manifold a light skim of assembly paste, but i trust them, also found a tiny crack by the wastegate on the exhaust side :eek: though looks ok other than that :( may be something to look at bit down the line :(
 
Turbo/Manifold join ;) all skimmed and mated properly with new studs, and the turbo flattened where the nuts/spacers are (see pics lol) to make sure that it stays airtight, also locktite'd on :D

if you click the pics will bring up a full size pic :)





 
Turbo looks much better Alex, it should seal correctly now, should have been done like this to start with.

I'm afraid if its cracked, it could only a matter of time before it goes completly, this is where mine was cracked and eventualy went into a hole. This comes from it running very hot, with out the oil being cooled it has a fight on its hands, plus as the turbo is orignally off a diesel its made to run at lower temps upto 600ish degress IIRC and proper petrol turbos are meant to run at upto 800degress due to different combustion process. I can even see in one of the pics that the turbo appears to be pink arround the waste gate, this is due to running too hot.

Though on a lighter note its not uncommon for an old turbo to soldier on for many miles with cracks on it.
 
Yeah sounds about right with what i was told earlier, asked RS Fabs about this and they said that it wasnt causing any problems at the moment, probably sealing when it heats up etc as its only a hairline crack, and that as i'll be fitting my oil cooler etc this weekend it should be ok for plenty of miles yet :)

Can definately see the difference in how tightly its held on now though, quite shocking really that it held on at all before :eek: (well ok wasnt all that shocking with how many times mine fell apart lol!)
 
Few setbacks so need to order in a few more bits on monday :)

But little goodie in place under the bonnet now ;)

Spot the new bit :D

normal_new_filter.jpg


Just incase you didnt spot it try this pic :D

normal_remote_filter.jpg


Remote oil filter mounted (though i want different bolts for it :)) :D and is all looking good :) didnt have to drill holes either, was very relieved at that :eek: :D

My other goodies fitted too but because gallery is down had to store images elsewhere and im out of storage space :(
 
Last edited:
Remote filter setup looks great mate :D plus you got it to fit in a suitable location without any extra drilling which is a bonus (y)

As for the new rear lights, they look superb dude, I absolutely love them :slayer:
 
Back
Top