General Fuel cut off switch?

[Brownbob2404]

Hi. I have a Peugeot bipper 1.3hdi 2013 (Fiat Fiorino) and the dash is saying 'fuel cut off unavailable' with a car symbol with a lock around it. Done some googling etc and I don't seem to be able to find a fuel cut off switch anywhere. Even had MultiECUscan on and the inertia switch says it's not the right conditions. So.
1. Does my vehicle have a fuel cut off and am I looking in the wrong place. (I've been looking mainly around the passenger footwell area).
2. Am I doing something wrong in MultiECUscan to not get the right conditions.
Thanks

 

[puntodad19]

Black box with a red button, under bonnet area ?

Or behind l/h/s passenger side panel ??

 

[Brownbob2404]

Black box with a red button, under bonnet area ?

Or behind l/h/s passenger side panel ??

Thank you but it's not there either. Just can't understand it. If somebody has a bipper/neme/fiorino it would be appreciated if they sent some images of where it is located.

 

[jackwhoo]

Please post photo of car symbol with lock around it-it may be immobiliser .

You could look using mes at imobilser allowing engine start or not.

 

[Brownbob2404]

Please post photo of car symbol with lock around it-it may be immobiliser .

You could look using mes at imobilser allowing engine start or not.

Hope this helps?

 

[jackwhoo]

Yes that is imobilser active light
That has to go off to allow start

 

[bugsymike]

Hope this helps?

As @jackwhoo has identified.
Are you sure when looking at MES it didn't mention immobiliser active/inactive in the live data or somewhere?

 

[Brownbob2404]

As @jackwhoo has identified.
Are you sure when looking at MES it didn't mention immobiliser active/inactive in the live data

As @jackwhoo has identified.
Are you sure when looking at MES it didn't mention immobiliser active/inactive in the live data or somewhere?

The MES has come back with this. The ECU is faulty

 

[Brownbob2404]

The MES has come back with this. The ECU is faulty

After speaking to a bloke who does ECU remaps he told me about this. And he was spot on. The wiring underneath the scuttle panel was under water. Waiting for another ECU kit from eBay.