Technical front cat

[jamo007]

so found out where my exhaust is blowing from BLOODY FRONT CAT :bang:

so ordered these of ebay hope they the right ones for my 2001 bravo

http://www.ebay.com/itm/200798956337?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 for the cat

and fixings

http://www.ebay.com/itm/221080871777?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648

hope this is right one i provided my reg so they should send the right one

jamo

 

[dave]

that cat is cheap, if yours is oem you should get nearly that much in scrap if the insides are intact.

 

[jamo007]

http://www.eurocarparts.com/ecp/c/F...5698b437f2e50e061673a4e7513e52757d4f7d&000059

well thats the price from euro parts so was thinking about right?

thanks jamo

 

[dave]

probably zero precious metals in them though. that's why oem cats scrap for lots of money aftermarkets cats dont.

 

[CFREITAS]

Jamo if yours is the Same as mine (2001) it should have a cat on the downpipe ????

http://www.ebay.co.uk/itm/91037-CAT...arts_Vehicles_CarParts_SM&hash=item2c6bdafe7f

 

[jamo007]

Yeah thanks I got underneath it last night and swapped my order to that one

Thanks by the way the flexi straight after on the next pipe is starting to go but thinking of changing to stainless ( u know anywhere does them @ good price )

Thanks jamo

 

[CFREITAS]

http://www.eurocarparts.com/ecp/c/F...5698b437f2e50e061673a4e7513e52757d4f7d&000059

well thats the price from euro parts so was thinking about right?

thanks jamo

it a non road legal type mate

bought one of those for my 1.2 bravo and failed the emissions test

 

[jamo007]

Thanks for ur help m8 brought one off the other ones so hopefully that should be ok

Thanks jamo

 

[dave]

it a non road legal type mate

bought one of those for my 1.2 bravo and failed the emissions test

did you run it in? it has to reach very high temperature and cool down a few times. and when testing it has to be very hot more so than an oem cat.

 

[CFREITAS]

did you run it in? it has to reach very high temperature and cool down a few times. and when testing it has to be very hot more so than an oem cat.

yes Dave was about a month old ready for the MOT and still failed.

 

[CFREITAS]

Yeah thanks I got underneath it last night and swapped my order to that one

Thanks by the way the flexi straight after on the next pipe is starting to go but thinking of changing to stainless ( u know anywhere does them @ good price )

Thanks jamo

Custom shouldn't be expensive

mine was a complete cat back for £480 and they also made a custom down pipe without a cat

 

[m20b25]

Blowing? You can get them welded in an engineers workshop

 

[jamo007]

Ur joking ? So I can take the cat off and get it welded ?

Thanks jamo