Styling Front Bumber

[Stuart_89]

hey, ive gota take out my driver side headlight and im pretty sure i have to remove the bumber to do it, but how do i remove the front bumber?

 

[minimad99]

remove or pull back both wheelarch liners, there are 2 or 3 bolts behind there on each side. Then remove all the ones along the bottom edge under the front, finally remove the 5/6 torx bolts under the bonnet.
I think that's all from memory.

 

[lifeline]

remove or pull back both wheelarch liners, there are 2 or 3 bolts behind there on each side. Then remove all the ones along the bottom edge under the front, finally remove the 5/6 torx bolts under the bonnet.
I think that's all from memory.

I did this the other weeken...there are another four bolts..two on each side that joing the bumers and the wings...caught me out. See this guide by coyle that I used for reference when i was changing my headlight bulbs.

https://www.fiatforum.com/stilo/145168-fitted-my-xenons-heres-how.html

 

[coyle]

https://www.fiatforum.com/stilo/145168-fitted-my-xenons-heres-how.html

yep, hopefully you will find everything you need on my guide here

 

[coyle]

Lifeline gets a thinks for pointing in the direction of my guide...
but my guide doesn't have one single thanks...
whats the world (this forum) coming too :bang:

 

[Argonought]

You've got one now :nerner:

(not because I intend fitting HIDs - just so I know how to get the bumper off )

 

[coyle]

Nicely done...
thanks very much

 

[coyle]

also..thanks stuart