Technical Fiat Panda key

[Tomer]

Hi.
For some reason, one button in the key was broken inside, and I can't press it anymore. I bought a new key set on AE in order to replace the key case with the new buttons. For as much as I found on YouTube and other sites, in order to open the old key case, I need to use a utility knife to cut out the Fiat sign and find a screw underneath. But I find the sign removal very difficult. Maybe someone did it already and can tell me how? As seen in the attached photo around the sign, I tried it many times.

 

[koalar]

Usually pop off quite easily, or even missing

You could try a hairdryer

 

[Tomer]

Usually pop off quite easily, or even missing

You could try a hairdryer

Thank you for the reply. Why should an airdryer help? Should it come out more easily when it's heated?

 

[koalar]

Thank you for the reply. Why should an airdryer help? Should it come out more easily when it's heated?

Yes

Softens the glue

The original glue is similar to double sided sellotape

Fingers crossed someone hasn't used something else, because the logo fell off in the past


You did order the correct shell, you want the one where the battery is under a separate cover, and not the one where the battery slots in the side


They are not compatible AE sell both types listed for the Panda


This is the same as yours

This is the wrong type and will damage the PCB