Electrical help needed!

[Chris]

Finally got around to wiring in the alarm I got months ago. Problem I'm having is where to put the power wires!

From the alarm module there are the following wires:

Red/Black - Connects to ON
Yellow/Green - Connects to START
Blue/White - Connects to ACC

Anyone know which wires the ON, START and ACC are in a Bravo??

Checked against the Haynes manual and I still can't get it working. Locks, arms, disarms etc fine.... Just can't get into the Programme mode to set up total closure etc...

 

[alan]

last time i did an alarm i actually connected to these wires near the barrel, it was easiers. use a mulitmeter to work them out!

 

[Chris]

I have been!! Worked out...

Brown is permanently live.
Red/black is live when you turn the key.
Can't remember the other one but its live when the engines running....

Also three other wires that come on with the ignition, acc ones I think.

Tried connecting to these with the use of a multimeter but no luck....

Just wondered if anyone knew for certain cos its driving me mad!!!

 

[Chris]

Anyone????