Technical eek no brakes 4x4

Currently reading:
Technical eek no brakes 4x4

Joined
Aug 10, 2003
Messages
125,210
Points
24,472
Location
Essex/Suffolk border
i used him today first time in years, got him to pull this punto out of back garden in to front garden, he did it no sweat, but his brake pedal goes straight to the floor and don't make brakes come on, not looked at any thing yet so no idea why yet


here is what he pulled

DSCF4369.JPG
 
Same thing happened to me with our 1991 4x4. Managed to bleed the brakes though and all worked OK, but the fluid kept disappearing with no obvious signs of a leak. In the end I found it was leaking from the master cylinder/servo. Fitted one from a later Fizz and all works fine but I think the master cylinders are available generally e.g. from shop4parts. Good luck! David
 
If the pot was empty and you filled it up without bleeding through, you will have air in the brake lines. Air compresses, so when you are putting your foot on the brake, you are likely just squeezing the air. Try bleeding the lines through and see what you get.
 
bleed just 1 brake today to see if anything happened, i got brakes :) going to bleed it all up an see what happens.
does a uno master fit a panda?
also today i got all the green off and started to g10 it, half of the car is now nice n white. i should have took some before pics :bang:
 
Back
Top