Technical Drivers Side indicator

Currently reading:
Technical Drivers Side indicator

markywa

New member
Joined
Jun 14, 2008
Messages
1
Points
1
The front drivers side indicator on my Ulysse (05) has stopped working. :mad: I've swapped the lampholders and bulbs between the drivers side and passenger side. Both sets work in the passenger side - neither set works in the drivers side.:confused:
If have the indicators switched on, then i can get the unit to flash if I put my hand down the back of the unit apply pressure to the bulb holder.
It seems that the electrical connection between the bulb holder and the indicator unit is broken somehow. I'm hoping that its just one of the contacts on the unit thats been pushed out of alignment but I can't work out how to take the headlight unit off of the car to check this out.
Is it fairly straightforward to get the unit out or will I need to take it to a fiat garage?
Any help or comments appreciated.
:):):)
 
:) Hi the bumper has to come off so you can get to the holder and bulb/connection. Its not as hard as it sounds search foglight bulb in this forum and you will find lots of posts ref the bumper.Good luck
 
Back
Top