Hello guys
Just found the forum and its great but have a couple of questions.
Im trying to wire up a falcon easyfit alarm to my 99 1.28v.Im unable to find the indicator wires which i have to tap into(theres 2 coming from the alarm)
Can anyone give me an indication (excuse the pun!) as to colour and location
Also i have a problem with the door trigger,I attached the wire to the green/white one coming from the switch at the drivers door,which was fine but only when u open the drivers door will it activate.
So i ran a wire over from the pink/white wire at the passenger side door switch BUT when i attached all the wires together and open either doors the alarm doesnt recognise it or sound.
When i ran the pink/white directly to the alarm trigger wire and open it it will sound the alarm but when both drivers and passenger door are connected nothing happens.
Can anyone shed some light on why this is happening or how to wire it correctly
Thanks
Just found the forum and its great but have a couple of questions.
Im trying to wire up a falcon easyfit alarm to my 99 1.28v.Im unable to find the indicator wires which i have to tap into(theres 2 coming from the alarm)
Can anyone give me an indication (excuse the pun!) as to colour and location
Also i have a problem with the door trigger,I attached the wire to the green/white one coming from the switch at the drivers door,which was fine but only when u open the drivers door will it activate.
So i ran a wire over from the pink/white wire at the passenger side door switch BUT when i attached all the wires together and open either doors the alarm doesnt recognise it or sound.
When i ran the pink/white directly to the alarm trigger wire and open it it will sound the alarm but when both drivers and passenger door are connected nothing happens.
Can anyone shed some light on why this is happening or how to wire it correctly
Thanks
