Arabam 1998 model Tipo MPI ve ECU'su ile motoru Lancia Dedra'dan alınmış. Bu arabayı 3 pinli bir konektör kullanarak bilgisayara bağlamak istiyorum. Delphi DS-150 ile nasıl yapılacağını gösteren birçok video izledim, ancak bağlantı kuramadım. ACC açıkken 3 pinli konektör (K hattı ve GND) arasında sürekli 0,8 volt görüyorum. Yardıma ihtiyacım var.
Tuning Diagnostic problem
- Thread starter Sahinx5
- Start date
- Replies 13
- Views 806
Currently reading:
Tuning
Diagnostic problem
Di you try to connect using a laptop? If so, check in 'settings' that the communicating line is selected, there are multiple options and just one works.
Can you say it in English?
I understand. Sorry, can't help you there, I don't know why that happens. Did you turn the contact key on while trying to connect?
Maybe... use the ELM327 instead of Delphi?!
Maybe... use the ELM327 instead of Delphi?!
I've tried ELM, Alpha, OBD, and many other options.
And you did have the ignition turned on to MAR position while trying to connect?
I tried it by turning the ignition on and off and starting the car.
You should have the ignition turned on MAR position (before cranking position) then try to connect.
Or even have the engine running and then connect the tool and try to connect the software.
Or even have the engine running and then connect the tool and try to connect the software.
Pfff... Sorry!
I tried very hard but it didn't work. Finally, I checked the ECU and all the cables with a multimeter, made some simple adjustments, and the car is working fine for now, but I'm really angry at myself for not being able to do this before because I've managed to connect many different types of vehicles.
