Technical Delta turbo rods !!!!

[bob16v]

Hi all , like i say , we put a turbo at tipo 16v. we get 260bhp @ 0.7 bar without intercooler (alcool fuel) and original pistons and rods. WE buy a forjed pistons ,but can't find the rods .somebody know if the tipo 16v rods are the same than coupe turbo ?The lancia delta turbo 8v has the same rods than 16v ?

thks !!!

 

[smokeme]

Hi all , like i say , we put a turbo at tipo 16v. we get 260bhp @ 0.7 bar without intercooler (alcool fuel) and original pistons and rods. WE buy a forjed pistons ,but can't find the rods .somebody know if the tipo 16v rods are the same than coupe turbo ?The lancia delta turbo 8v has the same rods than 16v ?

thks !!!

Tipo, Delta, Thema, Coupe all use the same basic 16VT engine with few changes. Bottom end is interchangeable, beware that turbo engines run forged internals on cast pistons with under piston oil squirters. Stock turbo rods won't hold over 400hp reliably and i personally wouldn't push 350hp with them

 

[kennyf]

Tipo, Delta, Thema, Coupe all use the same basic 16VT engine with few changes. Bottom end is interchangeable, beware that turbo engines run forged internals on cast pistons with under piston oil squirters. Stock turbo rods won't hold over 400hp reliably and i personally wouldn't push 350hp with them

Are the 20VT forged internasl too?

 

[pinin__prestatyn]

Forged pistons on the 20VT.

 

[bulldog5046]

Forged pistons on the 20VT.

it maybe different but on the 20vT Marea's in brazil they have graphited pistons :chin:

 

[sediciRich]

all rods are the same so go ahead and use them, check the small end bearing have not spun though.

rich