Technical Code Reader

[martin1962]

Hi can someone tell me what adapter is needed for the attached picture . I have a code reader but none of my adapters will fit so i need to order another on that will fit so i can read the error codes.

 

[r masters]

most code readers will fit what have u got

 

[martin1962]

hi its not the reader thats the problem its the odb2 16 pin sockets that do not fit i have round for bmw 2 types of rectangle but none are like this

 

[bigdong]

Hi can someone tell me what adapter is needed for the attached picture . I have a code reader but none of my adapters will fit so i need to order another on that will fit so i can read the error codes.

Looking at the pic, I would say its a standard OBD2 connecter.

 

[martin1962]

Hi if you look closley the odb2 in this oc is slopped on both sides and the first one on the van is different on the van

 

[Bill3455]

The plug you have in your hand is the right one for the socket in the op. But your plug looks a bit squashed on the lower short side so it might not fit the socket very easily. There is a latching tab on the plug short side which engages the lug on the lower side of the socket shown. I should just push on easy.

 

[r masters]

u can see straight away plug is battered it will never fit like this as said already needs put right before it will fit

 

[dave]

bottom left of the socket looks a bit bent too

 

[martin1962]

Thanks for your reply sorted and that out the code that came up was DC-01 if anyone cane help.