Hi All,
Another problem with the Croma, this time it was running ok and then just stopped completely.
Error codes per mes are as follows:
P0340 phase sensor camshaft position sensor circuit malfunction. Fault is now not detected but stored in memory. Engine temp was 86.7 Deg c fuel pressure 588 bar boost pressure 1788mbar engine speed 1196 rpm.
P2293 fuel pressure. Fault is present now engine temp 86.7 Deg c fuel pressure 91 bar boost pressure 1116 mbar engine speed 1288 rpm
P0087 pressure on injector support fault not present now but stored in memory. Engine temp 86.7 Deg c rpm 1058 fuel pressure 70 bar boost pressure 1068 mbar
P2294 Fuel pressure. Fault is present now. Engine temp 72.7 Deg c. Engine speed 276 rpm fuel pressure 7 bar boost pressure 984 mbar.
When trying to turn it over it makes a rapid high pitched sound when trying to turn over.
I suspect it might be related to the starting problem I've been having recently.
Any ideas or suggestions would be gratefully received.
Another problem with the Croma, this time it was running ok and then just stopped completely.
Error codes per mes are as follows:
P0340 phase sensor camshaft position sensor circuit malfunction. Fault is now not detected but stored in memory. Engine temp was 86.7 Deg c fuel pressure 588 bar boost pressure 1788mbar engine speed 1196 rpm.
P2293 fuel pressure. Fault is present now engine temp 86.7 Deg c fuel pressure 91 bar boost pressure 1116 mbar engine speed 1288 rpm
P0087 pressure on injector support fault not present now but stored in memory. Engine temp 86.7 Deg c rpm 1058 fuel pressure 70 bar boost pressure 1068 mbar
P2294 Fuel pressure. Fault is present now. Engine temp 72.7 Deg c. Engine speed 276 rpm fuel pressure 7 bar boost pressure 984 mbar.
When trying to turn it over it makes a rapid high pitched sound when trying to turn over.
I suspect it might be related to the starting problem I've been having recently.
Any ideas or suggestions would be gratefully received.