General Brembo info

[magnostorm41]

Basically after some info on the 4pot brembos calipers you run on your coupes.

I know that they run 305mm disc's but was this just on the LE 20VT coupe or did they use this set up one other models aswell?

Does anyone have the measurements between the mounting holes for the brackets?

What colour do these come standard? is it just red?

And the last question what would these cost from a dealer? I've phone around but they all seem confussed when it comes to price as i dont have a chassis number:bang:

Sorry for all the questions, any help would be great

 

[Coupe20vt]

on the normal 20v turbos the brembos are silver

not sure if the red ones are bigger but i was under the impression that silver ones were 288mm as it was a common mod in the vauxhall scene to use slightly modded fiat coupe turbo discs when using vectra sri v6 calipers, as 288mm and 4 stud with very close pcd.

best place would be on the coupe club, fccuk.org seen couple of sets go for around the £100 mark, theres a set of brand new red ones on there for £380 atm

 

[bulldog5046]

err.... they are not 288mm

the non-LE brembo's are silver and are 305mm

the N/A calipers have 284mm discs

i'm not sure about the 16v/turbo but i think its similar - 284mm

 

[Coupe20vt]

err.... they are not 288mm

the non-LE brembo's are silver and are 305mm

the N/A calipers have 284mm discs

i'm not sure about the 16v/turbo but i think its similar - 284mm

must of been the 16v turbo ones people used then, i used courtenay ones so never went down the coupe disc route myself

 

[symonh2000]

All 20VT's including the LE and plus use the same 305mm discs and Brembo calipers. The only difference is the colour.

I am pretty sure the 16VT calipers are the same as those on the Alfa 156, although the discs themselves are different due to only having 4 holes on the Coupe.

 

[mad20val]

the question ius where is the best place to gets the pads for the 20vt i ordered a set and they didnt fit think they were for a 16vt as there where no holes for the pins like mine have

 

[Vickster]

Try www.alternativeautos.co.uk for coupe parts