Technical Breather hose from air box

[Roguets50x]

Hi guys any ideas what this pipe is called and where I can buy one from please and thanks?

 

[Baglady1990]

Hi guys any ideas what this pipe is called and where I can buy one from please and thanks?
View attachment 446263

Try club500italia on eBay they are used parts but genuine

 

[Roguets50x]

Try club500italia on eBay they are used parts but genuine

Thanks, I’ve checked but not showing available,

 

[Baglady1990]

Thanks, I’ve checked but not showing available,

Message them just in case .. has yours split? You could try silicone tape in the meantime they sell it at Halfords… it’s great stuff

 

[Roguets50x]

Message them just in case .. has yours split? You could try silicone tape in the meantime they sell it at Halfords… it’s great stuff

It’s perished along the top section, I’ve tapped it for now, it wanted to replace and been searching for it for ages, but just don’t know the name or diameter of the pipe.
Thanks

 

[Baglady1990]

It’s perished along the top section, I’ve tapped it for now, it wanted to replace and been searching for it for ages, but just don’t know the name or diameter of the pipe.
Thanks

184638764176 eBay item number

 

[Roguets50x]

Awesome cheers

 

[John202020]

Think this is the correct one, if memory servers right its about 45cm long 6mm internal wall about 2-3mm

Genuine Brand New Fiat 500 Alfa Romeo Mito Air Filter Breather Hose 51888291 | eBay UK

Part Number: 51888291. Manufacturer Part Number: 51888291. Make: Fiat. Type: Brake Pads. Condition: New. Item Specifics. credit and debit cards. EAN: Does Not Apply.

www.ebay.co.uk

 

[The Panda Nut]

Just buy some pipe. Its called the big breather pipe, bu big I suppose they mean long. I bought a suitable pipe on eBay for about £4.80 thought I posted a guide in teh Panda section if not I will finish. I bought pipe to fit the air box end, its a bit smaller than the manifold fitting. I used a drill to 'ream' out the rubber pipe so it pushed on at the manifold. Make the pipe a little longer than standard and it will make fuutre air filter changes easier, but not so long that pools of liquid collect and block it. Parts on eBay etc are around the £30 mark which is frankly disgusting!

 

[John202020]

Remove and measure the old one, as above this could work

Silicone Vacuum Vac Hose Pipe Tube 3mm 4mm 5mm 6mm 8mm 9mm 10mm 13mm 16mm 19mm | eBay

It is a high gloss durable finish that matches the rest of our silicone hose range and is just as corrosion resistant and temperature resistant. Vaccum tubing sizes 3mm to 10mm. This enables our product to be in constant use without fear of warping or deterioration.

www.ebay.co.uk

 

[karolinaCihalova642]

Hi, where did yall connect the other end of the hose? I found this pipe just laying there under the hood.. it wasnt even connected and it has a pretty big hole in it. Do I need to jack up my car in order to get there? its a pretty tight space )

 

[karolinaCihalova642]

Just buy some pipe. Its called the big breather pipe, bu big I suppose they mean long. I bought a suitable pipe on eBay for about £4.80 thought I posted a guide in teh Panda section if not I will finish. I bought pipe to fit the air box end, its a bit smaller than the manifold fitting. I used a drill to 'ream' out the rubber pipe so it pushed on at the manifold. Make the pipe a little longer than standard and it will make fuutre air filter changes easier, but not so long that pools of liquid collect and block it. Parts on eBay etc are around the £30 mark which is frankly disgusting!

where is the guide? id find that helpful

 

[The Panda Nut]

where is the guide? id find that helpful

https://www.fiatforum.com/guides/authors/the-panda-nut.116806/ Its a straight forward job. Give a bit of extra length to the hose and it will make removing the air filter box much easier.

 

[The Panda Nut]

It’s perished along the top section, I’ve tapped it for now, it wanted to replace and been searching for it for ages, but just don’t know the name or diameter of the pipe.
Thanks

I think it is 8mm internal at one end and of course 5 at the other. I bought 5mm pipe and reamed the inside with a drill bit so it fitted the larger spiggot.