Hi guys, got and HGT 155 and need to do some work for the mot. done all except the hand brake. Its pi$$ poor most of the time the mot station are really anal about hand brake efficiency, my mate said it needs setting up properly, i.e. wind the piston all the way in and set it to 1-0.5 mm clearance of the back of the pad for the hand brake to work properly! This sounds like a ball ache to me and I've tried this in the past and its made no difference! Pads and discs are fine, I've bought new cables but not fitted them yet. Is there a procedure to setting the rear calipers up! Any help would be superb tonight or tomorrow, as the car is goin in for mot Monday. P.s the calipers aren't seized and I have 2 sets of rear calipers. I really don't want a failure sheet!