Bravo HGT 155 Ecu location

[ant]

Sorry to ask.. but can I heck as like find the location of the ecu.
Trying to find the model number of it before purchasing the ecu reading software.

Can anyone guide me (with pics if poss)?

Thanks in advance

 

[Will]

On top of the throttle body, just before the VIS unit. there are 2 big black plugs going into it, just follow the intake. It's held on with 4 bolts too, sorry i dont have a pic

 

[Ant]

Thanks Will. Didnt realise it was that..
bit obvious now.

Do you have a 155?
Im wanting to see if I can hook up DIY diagnostics, any idea if I can?

Dont want to splash out on a new MAF just yet until I know for definate its broke.

see here >
http://www.network54.com/Forum/15639/thread/1281942346/last-1281987021/HGT+155+jerky

 

[Will]

Yes mate ive got a 155. the diagnostic port is on the right hand side attached to the fuse box, with 2 wires going into it, don't know if you can do it yourself? i know the machine the guy used on mine was called a verus and cost £6k :|.

When mine need a new MAF it wasn't jerky, just didn't pull, real hesitant if you know what i mean? Diagnostics arn't too expensive either btw, should be no more than £30 at a garage

Good luck fella!

 

[ant]

Thanks mate..

Did the diag prove it was the MAF?

Im suffering the same I think.
Its more when started from cold, trying to get out of junctions can sometime be a joke on way to work.
After about 5-10mins its ok.

Gonna attempt to clean the sensor this weekend
with some absolute alcohol and cotton bud, see if that helps.
GRRRR

 

[Will]

Sorry it was for a totally different problem, it does sound kinda like the MAF but the maf only takes seconds to warm up? Bit of a strange one and i'm sorry i can't be any help