Ivor has got some roof liner out of a twin sun roof panda. there seems to be a hole for boot lid loom to go through, is it a pain to remove this to get it through the hole? it look like it a pain
Styling boot lid loom
- Thread starter dave
- Start date
Currently reading:
Styling boot lid loom
Hi Dave
I had to do it the other evening. It is a pain but possible, but it means disconnecting the heated rear window wiring and washer pipe. I found it easiest to disconnect the washer hose at the connector in the rear arch, but disconnect the wiring at the tailgate end and pull it back through the panel. It was fiddly. Or there is the short way - a clean cut to the roof lining!
David
I had to do it the other evening. It is a pain but possible, but it means disconnecting the heated rear window wiring and washer pipe. I found it easiest to disconnect the washer hose at the connector in the rear arch, but disconnect the wiring at the tailgate end and pull it back through the panel. It was fiddly. Or there is the short way - a clean cut to the roof lining!
David
OP
OP
i was thinking cut roof lining :devil:
but i'll have a look for this water pipe conector in rear arch first. thanks
but i'll have a look for this water pipe conector in rear arch first. thanks
