boot install punto

[phil_GT]

quick question for you

can you fit 2x12" subs in seperate or double sub boxes into the back of a punto GT?

help plz lol

 

[chaos]

What volume enclosures do you need for your subs?

 

[phil_GT]

no idea there the kenwood twister type red center cap on the subs and 800W max i think would you be able to find out fromthis information

 

[chaos]

no idea there the kenwood twister type red center cap on the subs and 800W max i think would you be able to find out fromthis information

Looking on www.edworthys.co.uk, I assume you mean the KFC-W3009 12 inch.

Doing a quick search on google under 'KFC-W3009 specification' up rooted this:
http://www.cardomain.com/item/KENKFCW3009

0.75 - 1.50 cuft recommended sealed enclosure volume, 1 - 2 cuft ported. As you want , the absolute maximum volume taken up is 4 cuft. Free air is also supported.

HTH

 

[phil_GT]

yep there the ones

so....... would 2 of thes ein seperate 12" boxes fit side by side in the boot of a punto gt

 

[chaos]

yep there the ones

so....... would 2 of thes ein seperate 12" boxes fit side by side in the boot of a punto gt

Time to crack out the tape measure methinks. As I don't have a Punto, I have no idea about Punto GT bootspace!

 

[phil_GT]

bugger lol

any 1 on here have any ideas on it is the gt boot the same as the s sx elx etc etc.. not putting them in at the moment due to sorting the insurance out, dont want the car stereo gear being stolen while its beign sorted

 

[GhettoMoose]

Yeah its the same Size, this is a pic of Mine with 2 12" subs in it, for an idea of size...

12" and a 10"

 

[phil_GT]

thx a bundle guys come to realise now there is plent yof space for my setup consisting 2 sub boxes 1 amp on back of a box and a power cap

next question is where is a ocnviniant ground point for audi stuff? is there 1 on the back of a light like my clio?

 

[custard]

actually better to make your own close to the amp rather than one already being used

 

[GhettoMoose]

I pulled up the carpet and drilled a hole next to the spare wheels bay on the flat boot.

That way you can access a nut and bolt from under the car and in the boot, mine was about 40CM long, had no problems

 

[phil_GT]

make my own im guessin this involves drilling :S

dont fancy drilling into my new car tried that while fitting a diy alarm on my micra gave up at 30 min of paint scratching

 

[custard]

well you must have had a crap drill.you will be through the boot floor or whateverin under a minute(you did have the drill going forward).personally prefer to drill something internal such as a boot bracket or something so its not exposed to the elements

 

[phil_GT]

yeah so long as i dont nakard ote up in the process :|