I have googled it put still cannot find any wiring diagrams.I am a novice at this but there must be about 10 wires coming from it
It really isn't that difficult.
I've attached the wiring diagram for a Visteon head unit... not sure if it's 100% accurate for this version of the head-unit, but it's accurate for the pins you need:
You need to have the following connected to the Bluetooth module:
-power from HU (when it's on) pin 16 on connector C
-ground from HU (when it's on) pin 17 on connector C
-audio L - pin 19 pin 19 on connector C
-audio R - pin 19 pin 20 on connector C
-audio L - pin 19 pin 18 on connector C
-button for pause/play/
pairing (you need to figure this out with a multimeter...will be easy if you buy one of the modules that come with all the stuff. Or you can leave all the button connected and find a way to integrate them all - extend the wires and find a place to install.
Optional
-Microphone (comes with the kit, but you'd need to figure out how where to install it/extend wires etc ... where i installed mine is
great in town, but there's to much noise while highway driving), i'd be inclined to move it around the mirror.
-AUX-in ... so you won't loose the AUX port or Blue&Me. I'm not using mine at all since the sound quality over Bluetooth is so good, but i did connect it and left it dangling at the back (gray the wire ending in red shrink tube).