- Joined
- Jan 5, 2013
- Messages
- 117
- Points
- 27
I saw a recent post answered by ECUNOTEMU regarding an obd android ELM 27TH interface with demo alfa obd android app.
Can anybody (or ecunotmu ) advise if this set up will work on the earlier 244 JTD series Ducato engine? I know that this engine isn't strictly OBD2 compliant but uses the ISO9141-2 protocol which is supported by the obd interface from eBay as suggested by 'ecunotmu'.
As a secondary question will 'Multieuscan' PC software with suitable cable diagnose low injection pressure without the engine running (ie just cranking over on the starter) or does the engine have to start and run?
Any help much appreciated new to all this OBD technology my old series Land rover doesn't have anything more complicated than an ignition switch on it never mind an ecu!
Can anybody (or ecunotmu ) advise if this set up will work on the earlier 244 JTD series Ducato engine? I know that this engine isn't strictly OBD2 compliant but uses the ISO9141-2 protocol which is supported by the obd interface from eBay as suggested by 'ecunotmu'.
As a secondary question will 'Multieuscan' PC software with suitable cable diagnose low injection pressure without the engine running (ie just cranking over on the starter) or does the engine have to start and run?
Any help much appreciated new to all this OBD technology my old series Land rover doesn't have anything more complicated than an ignition switch on it never mind an ecu!