C
carterado
Guest
Enjoying every minute with it ...
Currently reading:
Alfa 2,5 V6 in Bravo???
Enjoying every minute with it ...
B
big al
Guest
christ....
M
Matt
Guest
The way it should be 
Where did you find that???
Where did you find that???
M
mountainmachine
Guest
Now that would be an interesting conversion.
-------------------------------------------
Drives: Bravo HGT 155 Nov 2000 - Vroom Yellow
Family: Punto JTD ELX 2001 - Met Red - Volvo S40 2.0 TS 2002 - Red
Old: Brava 80sx 1999 - Red - Punto 60sx 1997 - Red
-------------------------------------------
Drives: Bravo HGT 155 Nov 2000 - Vroom Yellow
Family: Punto JTD ELX 2001 - Met Red - Volvo S40 2.0 TS 2002 - Red
Old: Brava 80sx 1999 - Red - Punto 60sx 1997 - Red
A
Ash
Guest
but how much did they have to chop out of the chassy arms to get it in i have done the measurements and its more than a tight fit it's a lose around 5inches of chassy arm fit.
i have done the measurements and its more than a tight fit it's a lose around 5inches of chassy arm fit.
OP
OP
carterado
Guest
Found it on autoscout24.at Someone is sellnig it there.
Enjoying every minute with it ...
Enjoying every minute with it ...
P
Paul R
Guest
dont know wh.ere you took your mesurements from ash because 156/gtvs/coupes/bravo all have the same chassis legs.
the alfa v6s bolt straight in but you have alot more work with moving header tanks and aux's
they definatly fit.
Paul R
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!
the alfa v6s bolt straight in but you have alot more work with moving header tanks and aux's
they definatly fit.
Paul R
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!
T
Tom
Guest
156 is a different chassis.
OP
OP
carterado
Guest
Looks nice in there ....
Enjoying every minute with it ...
Enjoying every minute with it ...
A
Ash
Guest
trust me paul i have been measuring and you already know my final decision.
and you already know my final decision.
A
Andy J F
Guest
Anyone look at the 147 GTA engine.
And would that fit?
2.7 V6 :L
And would that fit?
2.7 V6 :L
M
Matt
Guest
The GTA V6 is a 3.2l
P
Paul R
Guest
well i KNOW it will fit.i am working on a 156 gta as we speak and all the mount and width on the inner wings are the same!
the 3,2 engine is no bigger physically then the 2.5 so that would also fit. the chassis legs at least are the same (only the suspension top mounts are different)
Paul R
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!
the 3,2 engine is no bigger physically then the 2.5 so that would also fit. the chassis legs at least are the same (only the suspension top mounts are different)
Paul R
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!
A
Ash
Guest
when i measured it all up in the scrappies it worked out in my head that the drive belts and pullys would be about an inch into the chassy leg.
P
Paul R
Guest
well your calculations were wrong i am afraid, they will definatly fit! (hence the pic above)
Paul R
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!
(hence the pic above)Paul R
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!
A
Ash
Guest
when i see on in the flesh i will believe it
A
Ashley h
Guest
@ Paul
Is it the new powerfiat project you are working on?
Is it the new powerfiat project you are working on?
P
Paul R
Guest
lol.. believe it or not, it fits
and no, its not, the only project on at the moment is me le
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!
and no, its not, the only project on at the moment is me le
2xHLX owner,3xHGT, (then the darkside) 1xCoupe20vt now the proud owner of a Black Coupe20vt LE!