General Advice on alloys fitments for mk2b

[blkviper]

Hey guys,
I just bought some new alloys second hand today for my MK2b Punto. They are 16" MAK Volare Mirror with 195/45 R16 Tyres, the problem is that the alloys came off a Corsa and have all the corsa bolts and spacers which obviously do not work my punto.

Anyone know where I can find the right spacers for the wheels and the right length/size locking nuts?

Any advice would be much appreciated

 

[g50245]

The spacers and bolts can be found at Halfords.
Standard size for Fiat are M12x1.25 with a head size of either 17 or 19mm. The length depends on the alloys. (If I remember correctly someone on this forum mentioned 4 full turns of the bolt would be ok -I am not sure of this).

Just be aware, that the Fiat PCD is 98mm, the bore is 58.1mm and ET 33->38

You will need both adapter bolts (98 ->100mm) also known as "wobbly bolts" as well as spigot rings to make the alloys fit on the hub of your Punto.
Best place for spigot rings is Ebay

 

[dave]

https://www.fiatforum.com/punto-faq...need-know-about-before-buying-new-wheels.html

 

[burtz]

The spacers and bolts can be found at Halfords.
Standard size for Fiat are M12x1.25 with a head size of either 17 or 19mm. The length depends on the alloys. (If I remember correctly someone on this forum mentioned 4 full turns of the bolt would be ok -I am not sure of this).

Just be aware, that the Fiat PCD is 98mm, the bore is 58.1mm and ET 33->38

You will need both adapter bolts (98 ->100mm) also known as "wobbly bolts" as well as spigot rings to make the alloys fit on the hub of your Punto.
Best place for spigot rings is Ebay

I've always been told 7

 

[g50245]

That's why I said I wasn't sure
Couldn't remember if it was 4 or 7.

I've always been told 7