- Joined
- Apr 21, 2018
- Messages
- 138
- Points
- 96
ABS and EBD warning lights and stop engine message coming on -
I have checked continuity of sensors and its around 39ohms for all four at loom plugs and at abs unit plug, checked for all 12 volt feeds and earth, all is ok, cleaned corrosion from a couple of 12v live pins.
Lights and message still on, is the only way to clear faults with garage code reader? I don't have a laptop or a multiscan so can't do it myself.
Suppose worst car scenario is water has got into abs unit electronics?
I have checked continuity of sensors and its around 39ohms for all four at loom plugs and at abs unit plug, checked for all 12 volt feeds and earth, all is ok, cleaned corrosion from a couple of 12v live pins.
Lights and message still on, is the only way to clear faults with garage code reader? I don't have a laptop or a multiscan so can't do it myself.
Suppose worst car scenario is water has got into abs unit electronics?