Technical 75 cam

[Monty Dom]

Im thinking of putting a 1108 head and punto 75 cam onto my 999 carb panda engine. I know that the 75 cam doesnt have the lobe for the fuel pump and the 1108 head doesnt have the hole for it either so i will have to run an electric pump. Is there any thing else i will have to do?

 

[lewey]

Seems like a sound tuning idea to me. You will of course benefit properly from the tune up with some different jets in the carb. I think you would see a marked improvement using a jet calculator of some sort to scale up what you already have without the need of a rolling road. Ignition timing should be setup nearer the Punto 75.

 

[purple haze]

Hmmmmm...Love to know how you get on with this!!!!????

kev

 

[CLXCraig]

Common for the cento lot. Seems a good, in expensive mod. i reckon it will just rev more, not that much more power.

 

[lewey]

Common for the cento lot. Seems a good, in expensive mod. i reckon it will just rev more, not that much more power.

You would be surprised how aggressive that cam is in comparison with the normal one. Would feel more racey, but in a polite way!

 

[purple haze]

You would be surprised how aggressive that cam is in comparison with the normal one. Would feel more racey, but in a polite way!

Oooooo...revvy and racy...i like...lots of those heads in my local scrappy...so just bolt on and go????

kev

 

[lewey]

Oooooo...revvy and racy...i like...lots of those heads in my local scrappy...so just bolt on and go????

kev

It's the cam that does the business and they are only in Punto 75 models which are relatively hard to find at the scrappers in my experience.

 

[purple haze]

It's the cam that does the business and they are only in Punto 75 models which are relatively hard to find at the scrappers in my experience.

Will have a little look when i'm down there next...sure there was 2 last time...There was about 10-12 puntos last time i was there...