Technical 4x4 Panda hub

[ILoveMyFiats]

Hi. I don`t know is this right place to ask this on but i`ll ask still. Does Grande Punto hubs fit to the 169 4x4 Panda?
The reason i dreaming about such an loco operation is that i have another vehicle which has 4x100 56.6 wheels.
Changing Grande Punto hubs i have to have only one wheelsize for both cars. Now have 4x98 58.1 for Panda.
Grande Punto should have 4x100 56.6...according the information i got another source.
Thanks and i`ll try to be more active on here in future.

 

[koalar]

I don't know

But I suspect that they are quite different

Start by checking the driveshaft splines

I think one will be 25 the other 22

I pretty sure none of the measurements will line up

That's not to say parts parts can't be swapped around. Mixed and matched but does not look simple

They are built on different different platforms Punto the Small Common Components and Systems from 2005 and was a GM fiat partnership

The panda is the fiat mini platform from the 1990s by the fiat group

The simplest, would be to take both off and measure and start from thereabouts

 

[koalar]

Wobble bolts and spigot spacer are known to work