Technical 2022 ducato LCD instrument cluster ic retrofit to 2015 ducato

[Seanwinder22]

I gave up trying sorry so have no information to add
I tried and failed searched forums and others and got no closer so left old one in

Apparently it’s different body computer in pre facelift which I thought would be similar to fitting led headlights and doing proxi etc
But it isn’t
So sorry can’t help I wish you look tho

When I did my complete facelift on my 59 plate I couldn’t find any information but i
Did complete it and made sure to document it

 

[vladandrei83]

ANY workarounds with the 2022 instrument cluster to work on older pre-2022 ducatos?

I've tried full lcd instrument cluster on a Ducato 2019-2020. Same "functionality" as on 2017. I couldn't connect to instrument cluster using multi ecu scan, this seemed the most bizarre to me.

 

[vladandrei83]

Guys, I have an internal dashboard wiring loom from Ducato 2021. I'll check all pins wiring from instrument cluster connector. Maybe we can find a solution to retrofit 2021+ instrument cluster...cross fingers!!

 

[vladandrei83]

I'll try also to connect the full lcd instrument cluster to BCM using 2021+ dashboard wiring loom and I'll be back with feedback.

 

[Model1a]

Great! Keep us posted! Fingers crossed

 

[nikosgrk]

Yes, please let us know

 

[vladandrei83]

Btw, nobody tried simple LCD cluster? I want also to retrofit to new dashboard. I don't know if will work the new automatic climate panel, but it is also version with manual, on that we can use old old climate panel panel. I found a guy who sell both model. Also the new steering wheel can be incompatible. Someone tried?

 

[vladandrei83]

I've tried again full lcd instrument cluster yesterday. When is connected I can't reach BCM or instrument cluster. I also realize that it power off instantly the navi when instrument cluster is connected. I compared the connector and wires and full lcd have some CANs wires in connector where the old one don't have. I didn't have much time for other tests but for the moment I am sure that he send some signals back into wiring loom in CAN lines, this is the reason for blocking communication with BCM and other modules.