General 2016 500 lounge trip display

[Andy43]

Aaargh! Today I idly pressed the little 'trip' button on the end of the wiper stalk. Up came various trip options on the display. Short presses of the same button changes the item, a long press will reset that item.
Once I'd had enough I wanted to exit that mode and get back to the normal multifunction display, but I can't find a way out!
Handbook says nowt as far as I can see.....
Thanks.

 

[John202020]

Whilst ours is a 59 plate from trip a back to normal display is 9 presses if that helps

 

[Andy43]

Thanks John. Got there in the end, but more by luck than anything! The manual for the 2016 model hardly mentions this mode at all.

 

[Noxide]

Thanks John. Got there in the end, but more by luck than anything! The manual for the 2016 model hardly mentions this mode at all.

Haha yeah, takes a while! Just be careful not to press too many times or you'll have to go the whole way round again!

Sometimes mine resets when I turn the engine off. Other times it doesn't. It's odd!

 

[UFI]

Sometimes mine resets when I turn the engine off. Other times it doesn't. It's odd!

My non TFT car does this too, intermittently.

 

[Noxide]

My non TFT car does this too, intermittently.

I'm glad it's not just me, I figured it's just another of those quirks, like the clock running slow always.

 

[Maggie]

I think the clock on new 500's gets its time sync from the radio as its not needed to be altered in my 4 months of ownership.